New type clutch friction plate for models with deep splines with deep splined centre

2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)

These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510

 4 in stock

 05084430 GU05084430 05 08 44 30
 0508 4430 0508.4430 05.08.44.30

M8 clutch adjuster in black with slot for inserting cables

 4 in stock

 30602500 GU30602500 30 60 25 00
 3060 2500 3060.2500 30.60.25.00

Clutch friction plate

Also known as Guzzi ref. 27084460

 4 in stock

32084410-z 32084410 GU32084410 32 08 44 10
 3208 4410 3208.4410 32.08.44.10

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 3 in stock

Also fits Cagiva Elefant E750, Ducati 748

Clutch cable without adjuster

 3 in stock

27093022-z 27093022 GU27093022 27 09 30 22
 2709 3022 2709.3022 27.09.30.22

Nut for clutch centre gear CLA30810, fits on gearbox input shaft

See TOA14903 for special tool

 3 in stock

93601022-z 93601022 GU93601022 93 60 10 22
 9360 1022 9360.1022 93.60.10.22

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 2 in stock

 03093045 GU03093045 03 09 30 45
 0309 3045 0309.3045 03.09.30.45

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 2 in stock

14093051-z 14093051 GU14093051 14 09 30 51
 1409 3051 1409.3051 14.09.30.51

Clutch cable without adjuster

This replaces part number 19093051 and 19093001 with adjuster which is no longer available. We advise you to measure your existing cable before ordering in case you have a non standard set up

 2 in stock

19093052-z 19093052 GU19093052 19 09 30 52
 1909 3052 1909.3052 19.09.30.52

External clutch operating lever pivot for gearbox end cover

Superceded to Guzzi ref. 2A000384

 1 in stock

 95780271 GU95780271 95 78 02 71
 9578 0271 9578.0271 95.78.02.71